Forklift Truck
TLILIC0003 Licence to operate a forklift truck
Entry Requirements:
For students attending review days.
One review day will be free for selected classes, for subsequent review a charge of $200 applies.
If you book in for a review day and do not attend, this will be deemed as your review day.
- Participants must provide 100 points of identification and be 18 years of age or over.
- Maths is a major part of the theory component and a sound understanding is essential to be able to complete this training. You must have the ability to use and understand Basic English.
- Trousers‚ shirt and safety boots are required to be worn at each session.
For students attending review days.
One review day will be free for selected classes, for subsequent review a charge of $200 applies.
If you book in for a review day and do not attend, this will be deemed as your review day.
Our two-day training course is for people who have minimal or no forklift operating experience.
It’s an intensive, hands-on training course, with the majority of the time spent operating the equipment.
A strong theoretical and calculations component is also included that focuses on safe operating procedures.
It’s an intensive, hands-on training course, with the majority of the time spent operating the equipment.
A strong theoretical and calculations component is also included that focuses on safe operating procedures.
On successful completion of the program you will receive a Statement of Attainment for:
- TLILIC0003 Licence to operate a forklift truck This program is nationally recognised.
- An interim High Risk Forklift licence, in which you must lodge at a Service Tasmania outlet within 60 days. you will also need to pay them the prescribed fee.
You will gain an understanding of:
- Pre Start Inspections
- Controls and Dashboard orientation
- Common activities and/or tasks for forklift driver/operator
- Shut down procedure
- Machine fundamentals, Safety & Emergencies
Elements and Performance Criteria
ELEMENTS
Elements describe the essential outcomes.
PERFORMANCE CRITERIA
Performance criteria describe the performance needed to demonstrate
achievement of the element.
achievement of the element.
1. Plan work/task
1.1 Task requirements are identified from work orders or equivalent and
confirmed with relevant people and site inspection is conducted in
accordance with workplace procedures
confirmed with relevant people and site inspection is conducted in
accordance with workplace procedures
1.2 Work area operating surface is assessed to determine suitability for
operational use of forklift truck in accordance with workplace procedures
operational use of forklift truck in accordance with workplace procedures
1.3 Suitability of forklift truck and attachment working load limit (WLL) is
determined for the load/s and work/task requirements in accordance with
manufacturer requirements and workplace procedures
determined for the load/s and work/task requirements in accordance with
manufacturer requirements and workplace procedures
1.4 Working area is inspected and appropriate paths for operating the
forklift truck and moving and placing load/s in work area are assessed
and managed in accordance with workplace procedures
forklift truck and moving and placing load/s in work area are assessed
and managed in accordance with workplace procedures
1.5 Hazard and risk control measures are identified and reported to
relevant person/s in accordance with workplace procedures
relevant person/s in accordance with workplace procedures
1.6 Traffic management plan implementation is confirmed in accordance
with workplace procedures
with workplace procedures
1.7 Appropriate communication procedures are identified with relevant
people in accordance with workplace procedures
people in accordance with workplace procedures
1.8 All work is confirmed to ensure coverage of work/task requirements
for the relevant work area is in accordance with workplace procedures
for the relevant work area is in accordance with workplace procedures
2. Prepare for
work/task
work/task
2.1 Consultation with workplace person/s is maintained to ensure workplan is clear and consistent with site requirements in accordance with safe work procedures
2.2 Weather and work environmental conditions are assessed to determine any impact on forklift truck operations in accordance with manufacturer requirements and safe work procedures
2.3 Risk control measures for hazards identified are checked for implementation in accordance with safe work procedures
2.4 Forklift truck is accessed in a safe manner in accordance with manufacturer requirements and workplace procedures
2.5 Forklift truck logbook is checked in accordance with manufacturer, regulatory requirements and safe work procedures
2.6 Pre-start checks are carried out and any damage and defects are reported, recorded and appropriate action is taken in accordance with safe work procedures and manufacturer requirements
2.7 Forklift truck is set up correctly with any relevant attachments as per work plan in accordance with relevant manufacturer requirements including data plate and safe work procedures
2.8 Operational checks are carried out and any damage and defects are reported, recorded and appropriate action is taken in accordance with manufacturer requirements and safe work procedures
2.9 Hazard and risk control measures are checked for implementation and communicated to people in the work area in accordance with safe work procedures
3. Perform work/task
3.1 Weight and positioning of load is assessed to ensure compliance with forklift truck data plate requirements and in accordance with safe work procedures
3.2 Forklift truck is operated safely in accordance with manufacturer requirements and safe work procedures
3.3 Loads are monitored constantly when lifting, moving, lowering and placing to ensure stability of load and avoidance of hazards in accordance with safe work procedures
3.4 Unplanned and unsafe situations are responded to in accordance with safe work procedures
3.5 Loads are picked up, transported and placed using all forklift truck movements in accordance with safe work procedures
3.6 Forklift truck is parked, switched off and isolated appropriately in accordance with manufacturer requirements and safe work procedures
4. Pack Up
4.1 Forklift truck shutdown procedures are carried out in accordance with manufacturer requirements and safe work procedures
4.2 Forklift truck is secured to prevent unauthorised access/use in accordance with safe work procedures
Training
The Training will be delivered by an experienced and qualified trainer, face to face.
The training follows a specifically prepared course session plan.
The Training will be delivered by an experienced and qualified trainer, face to face.
The training follows a specifically prepared course session plan.
Assessment
Assessments will be conducted using a theory and practical assessment tool. The assessor will inform you of each of the assessments prior to them being conducted.
Investment: $600
Duration: 2 days
To request group bookings, specific course dates or for any general enquiries please click the Enquire button below.
Upcoming Workshops
| Name | Date | Location | Available Spaces | ||
| Forklift truck - Hobart | 17 & 18 August 2022 | 24 Jackson Street Glenorchy TAS 7010 | 0 | ||
| Forklift truck - Hobart | 24 & 25 August 2022 | 24 Jackson Street Glenorchy TAS 7010 | 0 | ||
| Forklift truck - Hobart | 31 August & 1 September 2022 | 24 Jackson Street Glenorchy TAS 7010 | 0 | ||
| Forklift truck - Hobart | 7 & 8 September 2022 | 24 Jackson Street Glenorchy TAS 7010 | 0 | ||
| Forklift truck - Hobart | 14 & 15 September 2022 | 24 Jackson Street Glenorchy TAS 7010 | 1 | ||
| Forklift truck - Hobart | 21 & 22 September 2022 | 24 Jackson Street Glenorchy TAS 7010 | 2 | ||
| Forklift truck - Hobart | 28 & 29 September 2022 | 24 Jackson Street Glenorchy TAS 7010 | 5 | ||
| Forklift truck - Hobart | 5 & 6 October 2022 | 24 Jackson Street Glenorchy TAS 7010 | 8 | ||
| Forklift truck - Hobart | 12 & 13 October 2022 | 24 Jackson Street Glenorchy TAS 7010 | 7 | ||
| Forklift truck - Hobart | 19 & 20 October 2022 | 24 Jackson Street Glenorchy TAS 7010 | 7 | ||
| Forklift truck - Hobart | 26 & 27 October 2022 | 24 Jackson Street Glenorchy TAS 7010 | 8 |
| Name | Date | Location | Available Spaces | ||
| Forklift truck - Launceston | 22 & 23 August 2022 | 414 Hobart Road, Youngtown TAS 7249 | 0 | ||
| Forklift truck - Launceston | 26 & 27 September 2022 | 414 Hobart Road, Youngtown TAS 7249 | 1 | ||
| Forklift truck - Launceston | 28 & 29 September 2022 | 414 Hobart Road, Youngtown TAS 7249 | 4 |
| Name | Date | Location | Available Spaces | ||
| Forklift truck - Devonport | 24 & 25 August 2022 | 129 Wright St, East Devonport TAS 7310 | 0 | ||
| Forklift truck - Devonport | 1 & 2 September 2022 | 129 Wright St, East Devonport TAS 7310 | 0 | ||
| Forklift truck - Devonport | 8 & 9 September 2022 | 129 Wright St, East Devonport TAS 7310 | 0 | ||
| Forklift truck - Devonport | 19 & 20 September 2022 | 129 Wright St, East Devonport TAS 7310 | 0 | ||
| Forklift truck - Devonport | 21 & 22 September 2022 | 129 Wright St, East Devonport TAS 7310 | 2 | ||
| Forklift truck - Devonport | 6 & 7 October 2022 | 129 Wright St, East Devonport TAS 7310 | 4 | ||
| Forklift truck - Devonport | 13 & 14 October 2022 | 129 Wright St, East Devonport TAS 7310 | 4 | ||
| Forklift truck - Devonport | 20 & 21 October 2022 | 129 Wright St, East Devonport TAS 7310 | 4 | ||
| Forklift truck - Devonport | 27 & 28 October 2022 | 129 Wright St, East Devonport TAS 7310 | 4 |